• Class Number 6104
  • Term Code 3260
  • Class Info
  • Unit Value 6 units
  • Mode of Delivery In Person
  • COURSE CONVENER
    • Prof Thomas Huber
  • LECTURER
    • Christoph Nitsche
    • Prof Colin Jackson
    • Dr Joe Kaczmarski
    • Prof Thomas Huber
  • Class Dates
  • Class Start Date 25/07/2022
  • Class End Date 28/10/2022
  • Census Date 31/08/2022
  • Last Date to Enrol 01/08/2022
SELT Survey Results

Many applications in modern chemistry and biochemistry depend on the ability to make, change and analyze proteins. After completion of the course, students will be familiar with all of the steps required for the production of proteins in bacteria, protein structural features and techniques for making, modifying (including the site-specific introduction of non-natural amino acids), and analyzing proteins. There is an emphasis on biophysical techniques to characterize biomolecules (e.g., SDS-PAGE, light scattering, circular dichroism spectroscopy, ultracentrifugation, mass spectroscopy, surface plasmon resonance), including discussion of their physical basis. Advanced structural analysis techniques (X-ray crystallograhy, NMR spectroscopy, electron microscopy, solution scattering) are also discussed. An introduction to bioinformatics, i.e. protein sequence alignment, 3D structure analysis and modelling is also included.

Learning Outcomes

Upon successful completion, students will have the knowledge and skills to:

  1. Understand the necessary elements of protein over-expression systems in bacteria,
  2. Make and purify proteins,
  3. Understand elements of peptide and protein structure and function,
  4. Understand techniques for modifying proteins,
  5. Demonstrate familiarity with basic techniques for protein analysis,
  6. Understand advanced biophysical techniques for protein analysis, including the capacity to discuss their relative merits and interpret data from those techniques,
  7. Demonstrate familiarity with software for protein visualization, sequence alignment and modelling.

Research-Led Teaching

Chemistry is an experimental science. The laboratory program consists of a variety of experimental exercises designed to:

1. illustrate and develop competence in a range of chemical techniques and manipulative skills.

2. emphasise the importance of a quantitative analytical approach to chemical systems.

3. develop an awareness of the scope and limitation of experimental observation and accuracy.

4. illustrate chemical topics, principles and concepts.

The last three practicals are computer-based, on the topics of bioinformatics and X-ray crystallography.

Field Trips

None

Examination Material or equipment

http://www.anu.edu.au/students/program-administration/assessments-exams/examinationconduct

Required Resources

You must wear the appropriate protective clothing (laboratory coat, safety glasses and covered, non-absorbant shoes) to participate in a practical class. Students who do not comply will not be permitted to work in the laboratory.

You need to purchase your own laboratory coat, your own safety glasses and a notebook to record data in for laboratory classes. Writing data on bits of paper is not good scientific practice. Laboratory coats and safety glasses can be purchased from the University Bookshop, Harry Hartog. You can also purchase a lab coat from the ANU Chemistry Society on O-Week Market Day and safety glasses are available from the vending machine on Level 1 in the Science Teaching Building.

Course Website – online resources

Login using your student ID and password at http://wattle.anu.edu.au to find the course websites for CHEM2208. You will be automatically added to these websites the evening after you have enrolled in the courses via ISIS. If you cannot see the online site/s, please contact the RSC Teaching Administrator on rsc.teaching@anu.edu.au.

These course websites will contain lecture material, extra resources, self-test questions and discussion board postings. Please check these sites at least once per week for important notices.

The recommended textbook is:

Selected chapters from Biochemistry by Voet & Voet, along with material from other textbooks as recommended by the lecturers.


Recommended student system requirements 

ANU courses commonly use a number of online resources and activities including:

  • video material, similar to YouTube, for lectures and other instruction
  • two-way video conferencing for interactive learning
  • email and other messaging tools for communication
  • interactive web apps for formative and collaborative activities
  • print and photo/scan for handwritten work
  • home-based assessment.

To fully participate in ANU learning, students need:

  • A computer or laptop. Mobile devices may work well but in some situations a computer/laptop may be more appropriate.
  • Webcam
  • Speakers and a microphone (e.g. headset)
  • Reliable, stable internet connection. Broadband recommended. If using a mobile network or wi-fi then check performance is adequate.
  • Suitable location with minimal interruptions and adequate privacy for classes and assessments.
  • Printing, and photo/scanning equipment

For more information please see https://www.anu.edu.au/students/systems/recommended-student-system-requirements

Staff Feedback

Students will be given feedback in the following forms in this course: laboratory reports, homeworks and the mid-semester exam. Students are encouraged to go through their marked exam and discuss the feedback in tutorials and with the Convenor.

Student Feedback

ANU is committed to the demonstration of educational excellence and regularly seeks feedback from students. Students are encouraged to offer feedback directly to their Course Convener or through their College and Course representatives (if applicable). The feedback given in these surveys is anonymous and provides the Colleges, University Education Committee and Academic Board with opportunities to recognise excellent teaching, and opportunities for improvement. The Surveys and Evaluation website provides more information on student surveys at ANU and reports on the feedback provided on ANU courses.

Class Schedule

Week/Session Summary of Activities Assessment
1 2 lectures, 1 tutorial
2 2 lectures, 1 tutorial, 1 laboratory practical
3 2 lectures, 1 tutorial, 1 laboratory practical
4 2 lectures, 1 tutorial, 1 laboratory practical
5 2 lectures, 1 tutorial, 1 laboratory practical
6 2 lectures, 1 tutorial
7 2 lectures, 1 tutorial
8 2 lectures, 1 tutorial, 1 computer-based practical
9 2 lectures, 1 tutorial, 1 computer-based practical
10 2 lectures, 1 tutorial, 1 computer-based practical
11 2 lectures, 1 tutorial
12 2 lectures, 1 tutorial

Assessment Summary

Assessment task Value Learning Outcomes
Mid-semester Exam 32 % 1,2,4,6,7
End of Semester Exam 32 % 1,2,4,6,7
Laboratory Reports 35 % 3,5

* If the Due Date and Return of Assessment date are blank, see the Assessment Tab for specific Assessment Task details

Policies

ANU has educational policies, procedures and guidelines, which are designed to ensure that staff and students are aware of the University’s academic standards, and implement them. Students are expected to have read the Academic Misconduct Rule before the commencement of their course. Other key policies and guidelines include:

Assessment Requirements

The ANU is using Turnitin to enhance student citation and referencing techniques, and to assess assignment submissions as a component of the University's approach to managing Academic Integrity. For additional information regarding Turnitin please visit the Academic Integrity . In rare cases where online submission using Turnitin software is not technically possible; or where not using Turnitin software has been justified by the Course Convener and approved by the Associate Dean (Education) on the basis of the teaching model being employed; students shall submit assessment online via ‘Wattle’ outside of Turnitin, or failing that in hard copy, or through a combination of submission methods as approved by the Associate Dean (Education). The submission method is detailed below.

Moderation of Assessment

Marks that are allocated during Semester are to be considered provisional until formalised by the College examiners meeting at the end of each Semester. If appropriate, some moderation of marks might be applied prior to final results being released.

Participation

To ensure a passing grade (or better), students are required to pass both theory and laboratory components of the course.

Laboratory attendance rule

The Research School of Chemistry considers the laboratory component of all courses to be an integral part of each course and as such all laboratory sessions are compulsory. It is therefore the policy of the Research School of Chemistry that students will attend all laboratory classes scheduled for any course. Absences must be notified (in advance, if possible) to the course convenor, and accompanied by adequate and appropriate documentation justifying the absence.

Laboratory classes (4 hr sessions) will run for most of the semester, beginning in the second week.

The submission of all laboratory reports is compulsory. There is a penalty of 5% per working day for the late submission of laboratory reports.

A pass in the prescribed laboratory work is required in order to gain a pass in this course.

Safety

You must wear the appropriate protective clothing (laboratory coat, safety glasses and covered, non-absorbent shoes) to participate in a practical class. Students who do not comply will not be permitted to work in the laboratory. Please refer to the Chemistry 1 lab manual for information on the Research School of Chemistry’s policy on wearing contact lenses in the laboratory.

PLEASE NOTE: A student who consumes any laboratory chemicals or compounds that have been prepared in the laboratory will be excluded from the course.

Remote students

Registered remote participants will be able to learn about the laboratory components of the course by video tutorials. Lectures and tutorials will be recorded and made available to all students.

Examination(s)

1 x mid-semester exam

1 x end of semester exam

Please note, that where a date range is used in the Assessment Summary in relation to exams, the due date and return date indicate the approximate timeframe in which the exam will be held and results returned to the student (official end of Semester results released on ISIS). Students should consult the course wattle site and the ANU final examination timetable to confirm the date, time and venue of the exam.

Supplementary Assessment

The Supplementary Examination will be held at the end of November 2022. You will be formally advised after the end of semester examination whether you need to undertake supplementary assessment.

Assessment Task 1

Value: 32 %
Learning Outcomes: 1,2,4,6,7

Mid-semester Exam

Two-hour exam held in the mid-semester exam period.

The mid-semester exam will assess lecture material covered in the first term's lectures, tutorials and practicals. It is hoped that the mid-semester exam will alert students to the standards expected and give valuable early feedback on progress.

The date range is a general indication of when the mid-semester exam will be held. Please check the ANU Examination Timetable to confirm the date, time and location of the mid semester exam.

Value: 32.5%

Rubric

Assessment Task 2

Value: 32 %
Learning Outcomes: 1,2,4,6,7

End of Semester Exam

Two-hour exam held in the end of semester exam period.

The end of semester exam will assess lecture material from the remaining set of lectures, tutorials and practicals and will be held in the end of semester exam period.

The date range in the Assessment Summary indicates the start of the end of semester exam period and the date official end of semester results are released on ISIS. Please check the ANU Final Examination Timetable http://www.anu.edu.au/students/programadministration/assessments-exams/examination-timetable to confirm the date, time and location exam.

Value: 32.5%

Assessment Task 3

Value: 35 %
Learning Outcomes: 3,5

Laboratory Reports

Seven reports for four laboratory-based and three computer-based practicals are to be submitted via the course Wattle site. Submission date will be at the end of the week following each practical. You will be required to electronically sign a declaration as part of the submission of your assignment. Please keep a hard copy of the laboratory report for your records.

Value: 7 x 5% = 35%

Academic Integrity

Academic integrity is a core part of the ANU culture as a community of scholars. At its heart, academic integrity is about behaving ethically, committing to honest and responsible scholarly practice and upholding these values with respect and fairness.


The ANU commits to assisting all members of our community to understand how to engage in academic work in ways that are consistent with, and actively support academic integrity. The ANU expects staff and students to be familiar with the academic integrity principle and Academic Misconduct Rule, uphold high standards of academic integrity and act ethically and honestly, to ensure the quality and value of the qualification that you will graduate with.


The Academic Misconduct Rule is in place to promote academic integrity and manage academic misconduct. Very minor breaches of the academic integrity principle may result in a reduction of marks of up to 10% of the total marks available for the assessment. The ANU offers a number of online and in person services to assist students with their assignments, examinations, and other learning activities. Visit the Academic Skills website for more information about academic integrity, your responsibilities and for assistance with your assignments, writing skills and study.

Online Submission

You will be required to electronically sign a declaration as part of the submission of your assignment. Please keep a copy of the assignment for your records. Unless an exemption has been approved by the course convenor submission must be through Turnitin.

Hardcopy Submission

For some forms of assessment (hand written assignments, laboratory notes, etc.) hard copy submission is appropriate when approved by the course convenor. Hard copy submissions must utilise the Assignment Cover Sheet. Please keep a copy of tasks completed for your records.

Late Submission

Late submission of assessment tasks without an extension are penalised at the rate of 5% of the possible marks available per working day or part thereof. Late submission of assessment tasks is not accepted after 10 working days after the due date, or on or after the date specified in the course outline for the return of the assessment item. Late submission is not accepted for take-home examinations.

Referencing Requirements

Accepted academic practice for referencing sources that you use in presentations can be found via the links on the Wattle site, under the file named “ANU and College Policies, Program Information, Student Support Services and Assessment”. Alternatively, you can seek help through the Students Learning Development website.

Returning Assignments

Marked laboratory reports will be available via Wattle two weeks after submission.

Extensions and Penalties

Extensions and late submission of assessment pieces are covered by the Student Assessment (Coursework) Policy and Procedure. Extensions may be granted for assessment pieces that are not examinations or take-home examinations. If you need an extension, you must request an extension in writing on or before the due date. If you have documented and appropriate medical evidence that demonstrates you were not able to request an extension on or before the due date, you may be able to request it after the due date.

Resubmission of Assignments

If the standard of a lab report is deemed unsatisfactory by the course convenor (on advice from the laboratory demonstrator) you may be asked to resubmit the report.

Privacy Notice

The ANU has made a number of third party, online, databases available for students to use. Use of each online database is conditional on student end users first agreeing to the database licensor’s terms of service and/or privacy policy. Students should read these carefully. In some cases student end users will be required to register an account with the database licensor and submit personal information, including their: first name; last name; ANU email address; and other information.
In cases where student end users are asked to submit ‘content’ to a database, such as an assignment or short answers, the database licensor may only use the student’s ‘content’ in accordance with the terms of service – including any (copyright) licence the student grants to the database licensor. Any personal information or content a student submits may be stored by the licensor, potentially offshore, and will be used to process the database service in accordance with the licensors terms of service and/or privacy policy.
If any student chooses not to agree to the database licensor’s terms of service or privacy policy, the student will not be able to access and use the database. In these circumstances students should contact their lecturer to enquire about alternative arrangements that are available.

Distribution of grades policy

Academic Quality Assurance Committee monitors the performance of students, including attrition, further study and employment rates and grade distribution, and College reports on quality assurance processes for assessment activities, including alignment with national and international disciplinary and interdisciplinary standards, as well as qualification type learning outcomes.

Since first semester 1994, ANU uses a grading scale for all courses. This grading scale is used by all academic areas of the University.

Support for students

The University offers students support through several different services. You may contact the services listed below directly or seek advice from your Course Convener, Student Administrators, or your College and Course representatives (if applicable).

Prof Thomas Huber
t.huber@anu.edu.au

Research Interests


Prof Thomas Huber

By Appointment
By Appointment
Christoph Nitsche
6125 3821
christoph.nitsche@anu.edu.au

Research Interests


Christoph Nitsche

By Appointment
Prof Colin Jackson
6125 8325
colin.jackson@anu.edu.au

Research Interests


Prof Colin Jackson

By Appointment
Dr Joe Kaczmarski
joe.kaczmarski@anu.edu.au

Research Interests


Dr Joe Kaczmarski

By Appointment
Prof Thomas Huber
6125 9346
thomas.huber@anu.edu.au

Research Interests


Prof Thomas Huber

By Appointment
By Appointment

Responsible Officer: Registrar, Student Administration / Page Contact: Website Administrator / Frequently Asked Questions