Program Requirements

The Bachelor of Engineering (Research and Development) (Honours) requires completion of 192 units, of which:

A maximum of 60 units may come from completion of 1000-level courses

The 192 units must include:

84 units from completion of the following compulsory courses:

PHYS1013 Physics of Materials

ENGN1211 Discovering Engineering

ENGN1217 Introduction to Mechanics

ENGN1218 Introduction to Electronics

ENGN2217 Mechanical Systems and Design

ENGN2218 Electronic Systems and Design

ENGN2228 Signals and Systems

ENGN2300 Engineering Design 2: Systems Approaches for Design

ENGN2301 Engineering Design 3: Systems Approaches for Analysis

ENGN2706 Engineering Research and Development Project (Methods)

ENGN3100 Practical Experience (0 units)

ENGN3300 Engineering Design 4A: Systems Approaches for Management

ENGN3301 Engineering Design 4B: Systems Approaches for Operations

ENGN4712 Engineering Research & Development Project (12 units)

12 units from the following BE R&D project courses

ENGN2707 Engineering Research and Development Project

ENGN3706 Engineering Research and Development Project

ENGN3712 Engineering Research and Development Project (6 or 12 units)

ENGN4706 Engineering Research and Development Project

6 units from completion of a core course from the following list:

COMP1100 Programming as Problem Solving

COMP1130 Programming as Problem Solving (Advanced)

COMP1730 Programming for Scientists

6 units from completion of a core course from the following list:

MATH1013 Mathematics and Applications 1

MATH1115 Advanced Mathematics and Applications 1

6 units from completion of a core course from the following list:

MATH1014 Mathematics and Applications 2

MATH1116 Advanced Mathematics and Applications 2

A minimum of 6 units from completion of one or more courses from the following list:

ENGN2222 Engineering Thermodynamics

ENGN2219 Computer Architecture and Simulation

48 units from completion of one of the following Engineering majors, of which 12 units contribute towards meeting the course requirements above:

Electronic and Communication Systems

Mechatronic Systems

Renewable Energy Systems

Environmental Systems

36 units from completion of elective courses offered by ANU.

Students must achieve a minimum 75% weighted average mark across all compulsory courses undertaken in each period (Summer/First Semester/Autumn) and (Winter/Second Semester/Spring) in order to continue in the Bachelor of Engineering (Research and Development)(Honours). Students who do not achieve a minimum of 75% weighted average mark will be transferred to the Bachelor of Engineering (Honours) single degree.

Students must achieve a minimum 80% final Honours mark in order to graduate with the Bachelor of Engineering (Research and Development) (Honours). Students who do not achieve a minimum 80% final Honours mark will be transferred to the Bachelor of Engineering (Honours) degree program.

Honours

Students must formally enrol in ENGN4100 Engineering Honours at the commencement of their intended final semester.

Honours Grade Calculation

HONS4700 Final Honours Grade will be used to calculate the Class of Honours and the Mark. It will be calculated as the weighted average mark (WAM) of the courses listed below. The mark for each course is weighted by the units of credit (UoC) of the course, as well as a course weighting as indicated below. WAM is calculated as follows:

WAM = (?¦?mark*UoC*weighting?)/(?¦?UoC*weighting?)

Science and Engineering Foundations (0.1 weighting): ENGN1211, COMP1100 or 1730, MATH1013 or 1115, MATH1014 or MATH1116 and PHYS1013.

Engineering Fundamentals (0.2 weighting): ENGN1217, ENGN1218, ENGN2217, ENGN2218, ENGN2219, ENGN2222, ENGN2228.

Professional Core (0.3 weighting): ENGN2300, ENGN2301, ENGN3300, ENGN3301, ENGN3200.

Engineering Discipline (0.4 weighting): ENGN3000-series and ENGN4000-series electives, ENGN2706, ENGN2707, ENGN3706, ENGN3712, ENGN4706, ENGN4712 and ENGN4300.

Elective Study

Once you have met the program requirements of your degree, you may have enough electives to complete an additional elective major, minor or specialisation.

Majors

Minors

Elective Study

Once you have met the program requirements of your degree, you may have enough electives to complete an additional elective major, minor or specialisation.

Study Options

Admission Requirements

At a minimum, all applicants must meet program-specific academic/non-academic requirements, and English language requirements. Admission to most ANU programs is on a competitive basis. Therefore, meeting all admission requirements does not guarantee entry into the program.

In line with the university's admissions policy and strategic plan, an assessment for admission may include competitively ranking applicants on the basis of specific academic achievement, English language proficiency and diversity factors.

The University reserves the right to alter or discontinue its programs and change admission requirements as needed.

Domestic applicants

Before applying for a program, you should review the general information about domestic undergraduate admission to ANU programs and how to apply, and the program-specific information below.

• Applicants with recent secondary education are assessed on:
  • completion of Australian Year 12 or equivalent, and the minimum Selection Rank (from their academic qualifications, plus any adjustment factors) requirement for this program; and
  • co-curricular or service requirement (applies to applicants who complete secondary education in the year prior to commencing at ANU); and
  • English language proficiency; and
  • any program-specific requirements listed below.
• Applicants with higher education study are assessed on:
  • previous higher education studies; or secondary education results if completed less than one full-time equivalent year (1.0 FTE) of a degree; or the result from a bridging or preparatory course; and
  • English language proficiency; and
  • any program-specific requirements listed below.
• Applicants with vocational education and training (VET) study are assessed on:
  • previously completed VET qualifications at AQF level 5 or higher (i.e. a Diploma or above); or secondary education results if the VET qualification is not completed; and
  • English language proficiency; and
  • any program-specific requirements listed below.
• Applicants with work and life experience are assessed on:
  • ATAR or equivalent if secondary education was completed; or the Special Adult Entry Scheme (SAES); or work experience; and
  • English language proficiency; and
  • any program-specific requirements listed below.

International applicants

Applicants who complete a recognised secondary/senior secondary/post-secondary/tertiary sequence of study will be assessed on the basis of an equivalent selection rank that is calculated upon application. A list of commonly observed international qualifications and corresponding admission requirements can be found here. Applicants must also meet any program specific requirements that are listed below.

Diversity factors & English language proficiency  
As Australia's national university, ANU is global representative of Australian research and education. ANU endeavours to recruit and maintain a diverse and deliberate student cohort representative not only of Australia, but the world. In order to achieve these outcomes, competitive ranking of applicants may be adjusted to ensure access to ANU is a reality for brilliant students from countries across the globe. If required, competitive ranking may further be confirmed on the basis of demonstrating higher-level English language proficiency.

Further information is available for English Language Requirements for Admission

Prerequisites

ACT: Mathematical Methods (Major)/Further Mathematics (Major)/Specialist Mathematics/Specialist Methods (Major), NSW: Mathematics or equivalent. More information about interstate subject equivalencies can be found here.

Adjustment Factors

Adjustment factors are additional points added to an applicant's Selection Rank (for example an applicant's ATAR). ANU offers adjustment factors based on performance and equity principles, such as for high achievement in nationally strategic senior secondary subjects and for recognition of difficult circumstances that students face in their studies. 

Selection Rank adjustments are granted in accordance with the approved schedules, and no more than 15 (maximum 5 subject/performance-based adjustment factors and maximum 10 equity-based adjustment factors) can be awarded. 

You may be considered for adjustment factors if you have:

• applied for an eligible ANU Bachelor degree program
• undertaken Australian Year 12 or the International Baccalaureate
• achieved an ATAR or equivalent at or above 70
• not previously attempted tertiary study.

Please visit the ANU Adjustment Factors website for further information.

Fee Information

All students are required to pay the Services and amenities fee (SA Fee)

The annual indicative fee provides an estimate of the program tuition fees for international students and domestic students (where applicable). The annual indicative fee for a program is based on the standard full-time enrolment load of 48 units per year (unless the program duration is less than 48 units). Fees for courses vary by discipline meaning that the fees for a program can vary depending on the courses selected. Course fees are reviewed on an annual basis and typically will increase from year to year. The tuition fees payable are dependent on the year of commencement and the courses selected and are subject to increase during the period of study.

For further information on Fees and Payment please see: https://www.anu.edu.au/students/program-administration/fees-payments

Scholarships

ANU offers a wide range of scholarships to students to assist with the cost of their studies.

Eligibility to apply for ANU scholarships varies depending on the specifics of the scholarship and can be categorised by the type of student you are.  Specific scholarship application process information is included in the relevant scholarship listing.

For further information see the Scholarships website.

Employment Opportunities

Organisations invest in R&D in order to gain a competitive advantage over others. R&D is at the forefront of new product design and development and is a wealth and change generator. Innovative solutions to many of the problems in society today will come from those working in R&D.

After graduation you will be skilled to work in R&D roles in industry, government, and academia, or as an accredited engineer.

Careers in engineering are diverse. Engineers are in high demand in Australia and overseas, and as an ANU graduate with a systems engineering background, you will bring extra value to future employers.

The skills and abilities you gain while studying are highly sought after in engineering companies, and also across many other professions and organisations.

Because of the unique systems approach at ANU many of our graduates quickly progress to senior management roles due to their skills and knowledge in more than one engineering discipline. For this reason engineering at ANU is often considered a springboard into the wider corporate world.

Our graduates work in many organisations including ABB, Accenture, Department of Defence, CEA Technologies, Cochlear Limited, Energy Australia, Ford, GHD, IBM, Northrop Consulting Engineers, Qantas, Telstra, Thales and Toyota.

Learning Outcomes

1. professionally apply systematic engineering methods to design optimised and sustainable solutions to complex, multi-disciplinary real-world engineering problems.
   
2. formulate and evaluate solutions to engineering problems by selecting and applying theoretical principles and methods from the underpinning physical, mathematical and information sciences.
   
3. proficiently apply advanced technical knowledge and appropriate tools in at least one field of engineering specialisation.
   
4. identify and critically evaluate current developments and emerging trends within at least one field of engineering specialisation.
   
5. understand the contextual factors that influence professional engineering practice, and identify the potential societal, ethical, and environmental impact of engineering activities.
   
6. communicate effectively with colleagues, other engineering professionals and the broader community employing a range of communication media and tools.
   
7. engage in independent research and investigation at the leading edge of the discipline through the application and synthesis of research-based knowledge and research methods.
   
8. engage effectively in critical reflection and independent learning to continue practicing at the forefront of the discipline.
   
9. work effectively and proactively within cross-cultural, multi-disciplinary teams, demonstrating autonomy, ethical conduct, well-developed judgement, adaptability and responsibility to achieve engineering outcomes at a high standard. 

Inherent Requirements

Information on inherent requirements are currently not available.

Further Information

Learn more about the degrees offered at the ANU College of Engineering and Computer Science, read current student profiles to see what campus life is really like, and discover what our graduates have achieved since leaving the College Visit the College of Engineering and Computer Science website.